Kimberly-Clark ICON, Руководство пользователя

Страница: 2 / 15

Install Dispenser Bracket
4. 3.
2.
2
3 4
1
5.
4
cm
4
cm
1
1 /4 ”
1
1 /4 ”
6
1 /2 ”
17
cm
40
cm
15
9 /16 ”
to Counter
1.
1. Measure 15 9 /
16
inches from the counter
top or back splash with a tape measure
to the bottom of the mounting bracket.
Make sure the built-in level on the
bracket reads level. Ensure the required
clearance space is free of obstructions
for proper dispenser installation.
Check
for regional & local installing/mounting
requirements.
2. Carefully brace the mounting bracket in
place once it is properly located on the
wall and mark holes to drill.
3. Remove the bracket from the wall,
leaving just the four marked holes. Drill a
hole in each of the four marked locations
so anchors can be inserted.
4. Tap in the four anchors in each drilled
hole so the bracket can be screwed to
the wall.
Install Bracket
For push buttons and other available parts,
contact your sales representative.
Enclosed** Tools Required:
5. Bring back the mounting bracket and
insert a screw into each wall anchor to
secure the mounting bracket to the wall.
Be sure to screw the mounting bracket to
the wall starting with the top right hole.
Make sure not to over-tighten the screw
and damage the bracket.
** Ensure that proper mounting hardware
is used for appropriate wall composition
as enclosed hardware may not be
compatible with your wall surface.