Kimaldi FingerVein, Инструкция по установке и программированию

Страница: 14 / 48

FingerVein Integration Module (VIM)
Installation and Programming Manual
www.kimaldi.com Page 14 of 48
7.1.1. Serial port configuration
The behaviour of the serial ports is defined from the
$1A, $1B
and
$1C
configuration
parameters:
Depending on the function associated to the port and baud rate, the values to be assigned
are detailed in the following table.
7.1.2. Event configuration
FingerVein VIM has the capability to start communications to the Host when any event
occurs in the machine (e.g. a key is pressed). The following parameters can be
configured:
Table 2: RS-232 port configuration
No. Description
Def.
$1A
CFG_ Host-
SerialPort
Determines the protocol and Baud Rate assigned
to the UART0. Refer to Table 3
$93
$1B
CFG_Reader-
Serial-Port
Determines the protocol and Baud Rate assigned
to the UART1. Refer to Table 3
$BB
Table 3: Reader configuration codes
Type of Reader Parameter and values
Details
Communication with the
Host, Bio-OCX protocol
CFG_ HostSerialPort
$90: 9600 baud
$91: 19200 baud
$92: 38400 baud
$93: 57600 baud
Only UART0
FingerVein Sensor
CFG_ReaderSerialPort
$BB: 57600 baud
Only UART1
Table 4: Event configuration
No. Description
Def.
$01
CFG_ ECHO
Defines the events reported to the Host (DB mod-
ule)
$50
$04
CFG_
SCITimeout
Time-out of the reception of the UART from the
RS232 reader(UART2-UI)
$FF
$0D
CFG
_EventCH
Communications channel through which the elec-
tronics will generate the event frame. Refer
to Table 5
$FF