background image

Page 4

Kim Lighting • 16555 E. Gale Ave. • P.O. Box 60080 • City of Industry, CA  91716-0080 • 626/968-5666 • FAX 626/330-3861

KIM LIGHTING LIMITED WARRANTY

When installed in accordance with Kim Installation Instructions and accepted trade practices, the
following shall apply:

General Product Limited Warranty Coverage

All material and component parts used in the manufacture of Kim Products, are warranted to be free
from defects of material and/or workmanship for a period of 1 year from date of sale, with the following
exceptions:

Auxiliary Equipment

All auxiliary equipment (such as lamps, ballasts, and transformers) provided by and/or included in Kim
Products shall carry the component manufacturer's warranty.

Copper and Bronze Landscape Components

Copper and Bronze Landscape fixture components shall be warranted against defects of material
and/or workmanship, and failure due to corrosion, for a period of 25 years from date of sale.

Composite In-Grade Components

Composite In-Grade fixture components installed below grade, shall be warranted against defects of
material and/or workmanship, and failure due to corrosion, for a period of 7 years from date of sale.

Aluminum Landscape Components

Aluminum Landscape fixture components not in direct contact with soil, shall be warranted against
defects of material and/or workmanship for a period of 3 years from date of sale.  Aluminum fixture
components in direct contact with soil shall be warranted from defects of material and failure from
corrosion for a period of 1 year from date of sale.

Limit of Liability and General Conditions

Only products which are installed, used and maintained in accordance with applicable Kim instructions,
specifications and accepted trade practices, are covered by the Kim Warranty.  During the warranty
period, with proof of purchase, Kim will repair or replace with the same or similar product, at Kim's
option, without charge.  Labor costs are the owner's responsibility and are excluded from this warranty.
This warranty is void if the product is modified, tampered with, misapplied, poorly installed, improperly
maintained, or subjected to abnormal conditions.

Repair or replacement as provided under this warranty is the exclusive remedy of the purchaser.  This
warranty is in lieu of all other warranties, expressed or implied, including any implied warranty of fitness
for a particular application.  Kim Lighting shall not be liable to the purchaser for indirect or
consequential damages.

Axial Flood 20 & 30 Series Mounting Options

Installation Instructions

How may we serve you better?

Please let us know.  Visit our website at:

www.kimlighting.com

Your concerns are important to us.

Содержание SM2

Страница 1: ...rength requirements shall be engineered by others Stanchion Mount Tenon SM2 The Stanchion Mount SM2 is made to be set directly into concrete Inside diameter of stanchion is 3K inches and will accommodate up to two 2 1 diameter conduits Concrete and soil engineering by others Installation Instructions Make certain the electrical is supply is OFF before starting installation 1 Dig hole to obtain des...

Страница 2: ...EERED BY OTHERS Side Tenon Mount STM 1A Cast vertical slip fitter with heavy extruded side tenon 2 aluminum pipe size tenon 2C O D 2 I D Installation Instructions Make certain electrical supply is OFF before starting installation 1 Remove splice cover 2 Attach side tenon mount to fixture yoke Square slipfitter with fixture and tighten set screws 10 ft lbs 3 Pull field wires through the pole tenon ...

Страница 3: ...l Flood 20 30 Series Mounting Options Installation Instructions 1 Fish wires by others through MTM and install MTM over tenon being careful not to pinch wires 2 Orient to desired direction and tighten 4 C 16 set screws Torque set screws to 10 foot pounds 3 To prevent windmilling remove tenon set screw drill recess in tenon for screw point and replace screw 4 Make wiring connections green to ground...

Страница 4: ...ts not in direct contact with soil shall be warranted against defects of material and or workmanship for a period of 3 years from date of sale Aluminum fixture components in direct contact with soil shall be warranted from defects of material and failure from corrosion for a period of 1 year from date of sale Limit of Liability and General Conditions Only products which are installed used and main...

Отзывы: