Page 5 of 9
Killion Industries, Inc. • 1380 Poinsettia Ave., Vista, CA 92081
Phone (760) 727-5102 • Toll Free (800) 421-5352 • Fax (760) 727-1622
www.killionindustries.com • [email protected] • [email protected]
Check air filter and replace if it is dirty. If needed, vacuum dust and debris from condenser coil and
motor area.
Replace any screens, panels, screws, etc. that may have been removed during the maintenance
procedure.
Disregarding any of the above written instructions will void the warranty.
Lighting
Fluorescent light tubes are mounted behind the top fascia. The ballast is self-contained within the light fixture.
The switch is located at the front left side next to the light fixture.
Refrigeration
Refrigerated merchandisers come pre-programmed at the factory. Please note the programmed settings are
generic factory settings. If necessary these settings can be adjusted by a qualified Refrigeration Service
Technician to accommodate a store’s unique ambient conditions and for the product being displayed. To
reset the controller back to default factory settings, see the section labeled
Resetting the LAE Refrigeration
Controller
in the
Appendix
of this manual.
Temperature Control
This merchandiser comes with a switch that can be used to adjust the temperature within the case. It is
located at the top front of the case, in the compressor area. Set the switch to the “Summer” setting during
warmer weather to lower the case’s temperature to keep product cool. Set the switch to the “Winter” setting
during cooler weather to raise the case’s temperature to prevent product freezing.
Improper maintenance or a reduction in scheduled
maintenance may result in hazardous conditions and reduce
case performance.
WARNING
L'entretien inexact ou une réduction de l'entretien
Programmé peut avoir comme conséquence des conditions dangereuses
et réduire l'exécution de cas.
AVERTISSEMENT
