Page 9 of 9
Killion Industries, Inc. • 1380 Poinsettia Ave., Vista, CA 92081
Phone (760) 727-5102 • Toll Free (800) 421-5352 • Fax (760) 727-1622
www.killionindustries.com • [email protected] • [email protected]
RESETTING THE LAE CONTROL TO FACTORY DEFAULT
Figure 1
Detail image of LAE Control Display.
Note: The case must be powered on to reset the controller settings.
1.
Locate the LAE Controller Display on your specific case. It is typically located near the compressor.
2.
Hold down both the “i” and the “x” buttons for 5 seconds. The parameter SPL will show on the screen.
3.
Tap the “
▼
” button. The screen will show the rES parameter.
4.
Hold down the “i” button. While holding down the button, tap the “
▼
” to change the setting from “nO”
to “YES”, then release the “i” button.
5.
Tap the “x” button to return the controller to normal operation. All parameters are now returned to the
default factory settings.
Should you have any questions call Killion Customer Service at 1-800-421-5352 x120 or email at
.
APPENDIX
