2
WARNING!
Read all instructions Failure to follow all instructions listed below may result in electric shock fire and/or serious
injury. The term “power tool” in all of the warning listed below refer to your mains operated (corded) power tool or battery operated
(cordless) power tool.
SAVE THIS INSTRUCTIONS
1) Electrical Safety
a)
Keep work area clean and well lit.
Cluttered and dark areas invite accidents.
b)
Do not operate power tools in explosive atmosphere, such as in the presence of flammable liquids, gases or dust.
Power tools
creat sparks which may ignite the dust of fumes.
c
) Keep children, and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) Electrical Safety
a)
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed
(grounded) power tools
. Unmodified plugs and matching outlets will reduce risk of electric shock.
b)
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.
There is an
increased risk of electric shock if your body is earthed or grounded.
c)
Don’t expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric shock.
d)
Do not abuse the cord. Never use the cord to carry, pull or unplug the power tool. Keep cord away from heat, oil, sharp
edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e)
When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of cord suitable for outdoor
use reduces the risk of electric shock.
3) Personal Safety
a)
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use power tool while you
are tired or under the influence of drugs, alcohol, or medication.
A moment of inattention while operating power tools may result in serious personal injury.
b)
Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions will reduce personal injuries.
Rubber gloves and non-skid footwear are recommended when working outdoors.
c)
Avoid accidentally starting the sensor screwdriver.
Pay attention to that the voltage used is suitable for this model.
Before plugging in the power plug of the sensor screwdriver, first make sure that the switch is off .
d)
Remove any adjusting keys or wrench before turning the power tool on.
A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury.
e)
Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
f)
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts.
Loose
clothes, jewelry, or long hair can be caught in moving parts
g)
Secure work.
Use clamps or a vice to hold the work. It is safer than using your hand and frees
both hands to operate the tool.
h)
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and
properly used.
Use of these devices can reduce dust related hazards.
i) Use a safety device. Wear protective earmuffs to reduce personal injury
Noise:
The typical A-weighted noise level acc. To EN62841-2-2
.Sound pressure level(LpA): 53.6 dB(A)
.Sound power level(LwA): 64.6 dB(A)
Vibration:
The vibration total value acc. EN62841-2-2
.Vibration emission value ah (m/s²): 0.17 m/s²
.Uncertainty K (m/s²): 0.02 m/s²
Important Safety Rules
