14
ADJUST THE BRUSH
1. Swing the brush to stay almost horizontal, loosen screw on the side of brush bracket.
2. Place 5~8 screws into the rail groove close to the holding plate rear end, loosen 2
screws on the side of the brush bracket, swing the brush down and adjust the height,
the brush just touch the screw heads slightly, and tighten the screws after adjustment.
3. When fix the brush position, keep suitable space for the Front Plate and Fixing Plate.
※
NOTE THE FOLLOWING WHEN MAKING ABOVE ADJUSTMENT
※
a.
After adjustment of the height of the brush, swing the brush by hand to make sure
the movement properly and smoothly.
b.
The brush length is
inconsistently,
please ensure the brush match rail when replace it.
