Kikusui PWX1500H, Руководство пользователя

Страница: 52 / 131

52
PWX
CONFIG Settings
CF34 to CF36 MAC address display
These parameters display the set MAC addresses. These parameters are displayed only
when the LAN interface is in use.
The MAC addresses are just displayed; they cannot be set from the panel. To set a fixed
MAC address, access the PWX series through a Web browser. When you access the PWX
series through a Web browser, do so under conditions in which a DHCP server or AUTO IP
can be used.
MAC addresses are set to 00.0F.CE.xx.xx.xx (where x is a hexadecimal number between 0
and F).
For information about the Web browser interface, see the included CD-ROM.
CF40 Resetting (LCI/ DEF) or applying (APPL) the LAN interface
settings
p. 44
Sets whether to reset or apply the LAN interface settings.
This parameter is displayed and can be set only when the LAN interface is in use.
CF41 IP address assignment method
Sets the IP address assignment method. This parameter is displayed and can be set only
when the LAN interface is in use.
Set whether to use (on: 1) or not use (off: 0) the following: DHCP server, AUTO IP function
(automatic assignment), and MANUAL IP function (manual assignment).
If an IP address is not assigned through a DHCP server, AUTO IP is used.
To use the MANUAL IP function, set the DHCP server and AUTO IP function to off. The
address that is assigned by the AUTO IP function is 169.254.x.x (where x is a number
between 0 and 254).
This parameter is applied when you turn the POWER switch off and on or when you execute
APPL with CF40.
If the LAN interface settings are reset (CF40: LCi/dEF), this is set to (110).
Parameter number Display Description
CF34 00.0F Displays the first and second MAC address numbers
CF35 CE.xx Displays the third and fourth MAC address numbers
CF36 xx.xx Displays the fifth and sixth MAC address numbers
CF34: 00.0F
CF36: 22.33
CF35: CE.11
Display example of the MAC address
“00.0F.CE.11.22.33:”
See
Value Parameter description
LCi The LAN interface settings will be reset to their factory default settings (factory
default setting).
dEF Resets the LAN interface and network settings (factory default values).
APPL Applies the CONFIG settings related to the LAN interface.