5
PWX series
Thin & Wide range
Equipped with standard LAN interface and optional VMCB function to support network-based remote control and monitoring
n
Easy access with the built-in web server
Use a browser from a PC, smartphone, or tablet to access the
web server built into the PWX series for convenient control and
monitoring.
[Recommended browser]
l
Requires for the Internet Explorer version 9.0 or later
l
Requires for the firefox 8.0 or later
l
Requires for the safari/mobile Safari 5.1 or later
l
Requires for the Chrome 15.0 or later
l
Requires for the Opera 11.0 or later
* Connecting with a smartphone, tablet, etc. requires
a Wi-Fi environment (wireless LAN router etc.).
n
RS-232C Interface
The PWX series is also equipped with a RS-232C connector.
It can be used for communication with PCs and sequencers.
Since the PWX series has a RJ45 connector, it is required for a
separate D-sub 9P-RJ45 adapter cable (RD-8P/9P).
Application: VMCB can be also used with USB/RS-232C!
Create and run sequences!
The “direct control” function
that works just like a TV remote
is convenient too!
Global commands can be
used for batch control of
VMCB-connected PWX
power supplies!
Emulate devices from companies around the world!
The command language and the emulation which are used
at the time of remote control can be set. When the emulation
setting is selected, the digital remote control is possible as a
substitute of other manufacturer’s device. Furthermore, the
RS232C interface corresponds to other products by setting
the command language into a LGCy language.
Emulation setting
Command language setting function
n
Application Software
Sequence Creation Software
SD013-PWX (Wavy for PWX)
SD013-PWX (Wavy for PWX) is an application software that
supports sequence creation and the operation for Kikusui
power supplies and electronic loads. Wavy allows you to create
and edit sequences visually with a mouse without programming
knowledge. It enables you to control the power supply in much
the same way as remote controller for such monitoring the
voltage and current, logging and so on.
The software that supports to the auto testing of the power supply.
Allows you to create and edit sequence data easily using a mouse !
l
Number of power supplies or electronic loads that the Wavy can control is
limited to one unit.
* When a VMCB connection is used, the slave units are controlled at the
same time the master unit is controlled.
l
CPU: Pentium 4 HT or better (Recommended: Core2 or better)
l
CD-ROM: Necessary to install the “Wavy”
l
Mouse: Necessary
l
Monitor: 1024 x 768 dots or higher resolution
l
Memory: 128MB or more
l
Interfaces: LAN, USB, RS-232C
[Operating environment, conditions]
Emulation setting
*IDN? The contents of reply
nonE
KIKUSUI, PWX750ML, PWX00003,
VER01.00 BLD0134
5700
Agilent Technologies, N5748A,
PWX00003, A.01.00
Gen
LAMBDA, GENH80-28-USB, S/N: PWX00003,
REV: 1U: 1.00-AP0134
PAG
KIKUSUI, PAGH80-28-USB, S/N:
PWX00003, REV: 1U: 1.00-AP0134
Set other PWXs connected
by LAN
[ *Themonitor only has 1 channel ]
