PWR Series Setup Guide
17
Connecting the Load
Connecting to the Output Terminal on the Rear Panel
Attaching the OUTPUT terminal cover
There are two types of OUTPUT terminal covers: bottom cover and
top cover.
1
Insert the hook of the bottom cover into the hole lo-
cated above and to the left of the output terminal.
The bottom cover is the one without screws.
2
Align the hook of the bottom cover to the groove lo-
cated to the side of the output terminal.
3
Align the bottom cover with the top cover, and fix
them in place using the screws attached to the top
cover.
Check that the screws are securely fastened.
Top cover
Align the protrusion on the inside
to the concavity of the output terminal
Insert into the hole
in the rear panel
Bottom cover
Align the top and bottom parts of the
terminal cover and screw them in place.
