LP01/02-TOS
3
Inspection Before Starting
Always inspect and confirm the following items before beginning an actual test.
If any abnormality or failure is found in the “Inspection Before Starting,” immediately
stop using the test probe and contact your Kikusui distributor or agent for repairs.
■
Test probe cable and LOW test lead
•
Check for broken sheathing and loose or cracked connectors.
•
Confirm electrical continuity.
■
Start switch
•
Confirm that the switch operates smoothly when pressed.
■
Contact pin
•
Check for any signs of damage.
•
Check the pin for loose connection.
LP01-TOS
LP02-TOS
1.
2.
3.
The pin is correctly
attached.
The pin connection
is loose.
Pin adjustment
1.
Turn the holder counter clockwise.
2.
Turn the pin fully clockwise.
3.
Turn the holder fully counter clockwise.