The LP01-TOS/LP02-TOS Test Probe is a dedicated probe for a KIKUSUI TOS6210/
TOS6200A/TOS6200/TOS6100 Earth Continuity Tester. Its convenient shape allows
faster connection to the device under test (DUT).
The LP01-TOS and LP02-TOS can measure until 30 A and 60 A respectively in the
earth continuity test.
• This product is designed to be used with a KIKUSUI Earth Continuity
Tester. Carefully read the warnings and precautions given in the Earth
Continuity Tester Operation Manual before attempting to use it.
Precautions for Use
■
Be sure to connect the remote control cable.
•
Never perform testing using the Tester START switch without the remote con-
trol cable.
■
Never use the test probe with other earth continuity testers.
•
The test probe is designed specifically for use with a KIKUSUI Earth Continu-
ity Tester. It cannot be used with other earth continuity testers, even if the
connector appears to be compatible.
■
Never use the product at currents over the rated maximum current
•
The rated maximum current (see Description *1 on page 7) of the probe is 30
Aac (LP01-TOS) or 60 Aac (LP02-TOS). Use at over currents may result in
fire.
■
Never touch the contact pin immediately testing is completed.
•
If the LP02-TOS is used more than 30 A, the contact pin will be high tempera-
tures. Never touch the contact pin immediately testing is completed. Touching
will result in getting burned.
■
Handle the test probe attentively. Do not swing it around.
■
Do not yank the test probe cable or drape it over any part of your body.
Part No. Z1-003-490, I0027201
Oct 2020
LP01-TOS/LP02-TOS
OPERATION MANUAL
TEST PROBE
NOTE