Kikusui DSI1020, Руководство по установке, Страница: 8 / 64

8
DSI1020/ DSI3020
Introduction
Product features
 Controlled from a PC software application
The test system including this product is controlled from a PC software application con-
nected via a communication interface.
SD009-PCR-LE Quick Immunity Sequencer 2 is used to control a test system consisting
of this product and one or more AC power supplies that will perform “voltage dips, short
interruptions and voltage variations immunity tests.”
 Three types of communication interfaces (RS232C, USB, and GPIB)
The product is standard equipped with an RS-232C interface.
“Options” (p. 3)
You can add a USB or GPIB interface as a factory option. These options gives you flexi-
bility in constructing your test system.
 Input voltage up to 500 V
The DSI3020 supports testing of 230 V three-phase four-wire, phase-voltage systems
and 400 V line-voltage systems.
 Incorporation into a total test system
By combining this product with a Kikusui Harmonic/Flicker Analyzer (KHA series) and a
line impedance network (LIN series), you can construct a total test system that fully com-
plies with relevant IEC standards.
The page on the right shows an example of a three-phase four-wire test system compris-
ing PCR-LEs, LIN3020JF, KHA3000, and DSI3020.
See