Kikusui DSI1020, Руководство по установке, Страница: 5 / 64

DSI1020/ DSI3020
5
Be sure to observe the following precautions
when installing the product.
• Do not use the product in a flammable environment.
Risk of explosion or fire. Do not use the product near alco-
hol, thinner, or other combustible materials, or in an environ-
ment containing such vapors.
• Avoid locations where the product is exposed to high
temperatures or direct sunlight.
• Do not install the product near a heater or in areas sub-
ject to drastic temperature changes.
The product’s operating temperature range is 0°C to 50°C.
• Avoid humid environments.
Do not install the product in high-humidity locations, such as
near a boiler, humidifier, or water supply.
Condensation may form even within the operating humidity
range. If this happens, do not use the product until the con-
densation dries up completely.
The product’s operating humidity range is 20 %rh to 80 %rh
(no condensation).
• Be sure to use the product indoors.
This product is designed for safe indoor use.
• Do not install the product in a corrosive environment.
Do not install the product in a corrosive atmosphere or in an
environment with a high level of sulfuric acid mist or other
types of poisonous gas. Doing so may damage the termi-
nals or cause the internal conductors to corrode. This can
lead to malfunction, damage to the product, or fire.
• Do not install the product in a dusty location.
Accumulation of dust can lead to electric shock or fire.
• Do not use the product in a poorly ventilated location.
Secure adequate space around the product so that air can
circulate around it. Allow at least 20 cm of space between
the product and the nearest wall (or obstacles).
• Do not place objects on top of the product.
Placing objects (especially heavy ones) on top of the prod-
uct can lead to malfunctions.
• Do not use the product in a location subject to strong
magnetic or electric fields or in a location where the
input power supply signal contains large amounts of
distortion or noise.
Doing so may cause the product to malfunction.
• Use the product in an industrial environment.
Using this product in a residential area may interfere with
radio and TV broadcast reception. In such case, users may
need to take special measures to reduce the electromag-
netic radiation.
• Affix the heavy object warning label.
Affix the heavy object warning label to the product where it
can be readily seen. The DSI1020 weights approximately
110 kg (243 lbs). The DSI3020 weighs approximately
230 kg (507 lbs).
• Do not install the product on an inclined surface or in a
location subject to vibrations.
The product may fall or tip over and cause damage and
injury.
• Lock the casters.
Use the caster lock levers to lock the casters.
• Use the base hold angles.
To prevent the product from falling over, use the base hold
angles to fix the product to the installation location.
Precautions when choosing the
installation location
Caster lock lever
Free
Lock
When the product is shipped from the factory, base
hold angles are attached to the left and right sides of
the bottom of the product.
Remove the base hold angles from the product.
Face the base hold angles away from the product, and
fix them in place using the screws that you removed.
4-M5
4-M5
Screw hole for anchor 2-M14
Pass the screws through the top screw holes.