Kikusui DPO2212A Скачать руководство пользователя страница 6

-iv-

DPO2212A

Safety Precautions

The following safety precautions must be observed to avoid fire
hazard, electrical shock, accidents, and other failures. Keep
them in mind and make sure that all of them are observed
properly.

Operatio

n

Manual

Line

Voltage

Users

• This product must be used only by qualified

personnel who understand the contents of this
operation manual.

• If it is handled by disqualified personnel,

personal injury may result. Be sure to handle it
under supervision of qualified personnel (those
who have electrical knowledge.)

• This product is not designed or manufactured for

general home or consumer use.

Purposes of use

• Do not use the product for purposes other than

those described in the operation manual.

Input power

• Use the product with the specified input power

voltage.

• For applying power, use the AC power cord

provided.  Note that the provided power cord is
not use with some products that can switch
among different input power voltages or use 100
V and 200 V without switching between them.  In
such a case, use an appropriate power cord.
For details, see the relevant page of this
operation manual.

Fuse

• With products with a fuse holder on the exterior

surface, the fuse can be replaced with a new one.

Содержание DPO2212A























































Отзывы: