Kikusui DPO2212A, Руководство по эксплуатации

Страница: 31 / 54

22 DPO2212A
○
PLZ-WU Series (A1 is used to control output (load)
current.)
A1
A2
EXT.CC
ANALOG COM
White
Blue
PLZ-WU
Provided wire kit
PLZ-WU DPO2212A
Connector（Molex:5264-12)
A3
7
8
1
2
3
4
5
6
6
4
Figure 3-19
* The output range of the DPO2212A is the HI range.
* To switch between Remote and Local, use the EXT/
INT switch on the front panel of the PLZ-WU
series. For details, refer to the operation manual
of the PLZ-WU series.
Remained line N.C
The color of the line
connected to the
terminal No. 3.
Shield lead wire
blue（Shield wire）
ANALOG COM
red・black
N.C
3-core shielded wire
The color of the line
connected to the terminal No. 1.
white
EXT CC
Soldering
Insulation tubes
DPO2212A
PLZ-WU
PLZ-WU Accessories
Remote control cable
1
12
3 black
4 blue
5 red
6 white
Figure 3-20
* Cut the cable end with the shield lead wire of
the provided wire kit sample (3-core shielded
wire) in DPO2212A, and connect it to the provided
control wire kit in PLZ-WU as shown in Fig. 3-20.
Insulate the soldered part with an insulation
shrinkage tube.