KIKKA BOO VICENZA, Инструкция по эксплуатации

Страница: 11 / 50

8b. OPENING AND FOLDING OF THE CANOPY
Extend or fold the canopy as picture 8b
9. TELESCOPE HANDLE BAR
Press the button as the arrow 1 in picture 9
10a. ADJUSTING OF THE FOOTREST
Press the button as arrow 1 in the picture 10 to adjust the footrest in 3 position
11a. ADJUSTING OF THE BACKREST
Lift up the button as arrow1 in the picture 11a to adjust the backrest to be in 3 position(sleeping or seat) as picture 11b.
12a. REVERSIBLE SEAT
Pull out the button and lift up the seat as arrow direction in picture 12a, then assemble the seat in opposite direction as picture 12b, insert the seat in the frame to finish
the assemble.
FOLDING OF THE STROLLER
When the seat back to the mother, Telescope the handle bar to the shortest position as 13a, fold the seat to the handle side as 13b, Then press and hold the button as arrow
3 not released, in same time lift up the carry handle as arrow 4 in the picture 13c, finally release the button to fold the stroller as picture 13d.
When the seat face to the mother, Telescope the handle bar to the shortest position as 13e, fold the backrest to the handle side as as 13f, Then press and hold the button as
arrow 3 not released, in same time lift up the carry handle as arrow 4 in the picture 13g, finally release the button to fold the stroller as picture 13h.
WARNING: BEFORE FOLDING,PLEASE MAKE SURE TO TELESCOPE THE HANDLE BAR TO THE SHORTEST POSITION IN ORDER TO PROTECT THE HANDLE NOT TO TOUCH THE FLOOR
14. ASSEMBLING THE CARSEAT 0+ GROUP
NOTE! Lock the safety brake before assembling the carseat.
Remove the seat from the frame as picture14a;
Insert one set down adaptor on the seat as picture14b;
NOTE! The down adaptor is universal for carrycot and carseat for height
Assembly the carseat with the adapters that are the part of its set. Stick the adapters in the handles located at the base of the carseat handle as picture 14c. You should
hear a “click” to finish the assemble as picture 14d.
NOTE! Before using, make sure that the adapters and the seat are properly assembled.
14e. REMOVING THE CARSEAT 0+ GROUP
NOTE! Lock the safety brake before removing the seat
In order to remove the seat with the adapters from the stroller frame, raise both levers on the adapters as picture 14e,and lift the seat up. In order to unstick the adapters
from the carseat. press the buttons located on the upper edges of the carseat and remove the adapters
NOTE! The manual, maintenance rules, warnings and guarantee card of the stroller 0+ are in their original package with the seat.
15a-f. ASSEMBLING OF THE CARRYCOT
In order to unfold the pram body, remove the bedding and the mattress, and then squeeze the metal tensioners on the bottom plate of the pram body in the direction of
the arrows (picture 15a-15e), until it locks in special holders. You should hear a “click”sounds locking the tensioner in the holder
NOTE! The pram body is designed for children up to 6 months old weighing up to 9 kg, which cannot sit, kneel or trundle by themselves. Stop using the stroller body if your
child starts sitting kneeling or trundling by itself
WARING: Do not use an additional mattress of thickness of more than 15mm.
The pram body canopy has 4-step adjustment. In order to adjust it, press simultaneously the buttons located at the base of the carrying handle and adjust the desire
position. The external canopy rant is also a carrying handle. In order to move the stroller body by holding the handle, place it in the top position
NOTE! Make sure that the carrying handle is locked in the correct position before you move the pram body
NOTE! The pram body can be assembled only back to the direction of travel( in this setting, the person pushing the pram is face to face with a child)
NOTE! Lock the safety brake before you assembly the pram body on the stroller frame
In order to assembly the pram body on the stroller frame, removed the bumper from the stroller ,then removed the seat , then insert the universal adapters on the frame
and assemble the pram, You should hear a click as 15f
NOTE! Before using, make sure that the stroller body is properly assembled
15g. REMOVING THE CARRYCOT
NOTE! Lock the safety brake before you remove the pram body
In order to remove the pram body, press simultaneously the buttons located on the adapters of the pram body and pull it upwards as 15g
16a-b. USING THE SAFETY BELT
Picture 16a-16b: There are 2 position for safety belt, the up position is suitable for one baby more than 6 months, the bottom position is suitable for one baby under than 6
months
16c. USING THE SAFETY BUCKLE:
Click here to lock the safety buckle on both sides as 16c. Press the middle button to release the safety button as 16c. You can adjust the length of the seat belt by pulling the
safety buckle on both sides as needed.
ENGLISH