Filter (on B110G only)
Your Water-Reel is equipped with a Filter to protect the water motor from dirt and debris, which may be
present in the irrigation water. The Filter protects
only
the water motor. The water flowing out of the sprinkler
is not filtered.
To clean Filter, remove Drain Valve on the Valve Assembly and pull screen out with fingertip. Clean and
inspect the screen for damage or rupture. Reinstall Filter and Drain Valve.
Never
attempt to clean the Filter while the machine is pressurized. Always turn off the water supply and
relieve pressure before starting any form of maintenance.
The Filter should be cleaned at least once each season, even when operating with clean water.
When pumping from ponds or streams, the Filter must be cleaned more frequently. In very dirty
water conditions it may be necessary to clean the Filter each time the Water-Reel is used.
Important
Drain Valve
Filter
Tubing Removal (on B110G only)
To remove the small tube lines from their fittings, depress the ring at the top of the fitting and pull tube out.
To reinstall the tubing insert into fitting and push firmly until it seats.
To disconnect, push in release collar
with thumb and index finger, pull the
tube free
To connect, push tubing in until it
bottoms on the tube stop.
24
Maintenance and Repair
