Water-Reel Start-Up & Operation
Note
: Spool Valve
must
be reset before each irrigation run.
*
The Spool Valve
is a stem valve located on the Gun Cart of the Water-Reel. This must not be used
as an ON/OFF valve for any purpose other than to automatically shut-off the sprinkler at the completion of an
irrigation run.
ON OPTIONAL WATER SHUT OFF MACHINES ONLY
Sprinkler Flow Selection Valve “OFF”
Sprinkler gun will shut off after irrigation run
Sprinkler Flow Selection Valve “ON”
Sprinkler gun will continue to operate after irrigation run
TO RESET:
push valve knob in
Important
When using the automatic water shut-off feature, be sure the water can
be shut-off automatically without damaging the water supply or the
Water-Reel! Stopping the flow of water can damage a pump or water
lines and excessive pressure can be created. A qualified person should
confirm if you could safely utilize the automatic water shut-off.
15
Machines equipped with the optional water shutoff can be set in either the On or Off position
(see below diagram)
.
The sprinkler control valve will only operate automatically if the Spool Valve has been reset
.
(see below diagram)
