Kieback & Peter MD10-FTL-HE, Быстрый старт

Страница: 28 / 44

en:key
|
Operation
28
/44
You want to always see the time in the information field.
► 1
Hold a magnet on the “magnet contact” for 5 seconds.
The “ACt” text appears in the information field and the clock icon appears
The current time is displayed permanently in the “information field“.
You want to always see the room temperature in the information field.
► 1
Hold a magnet on the “magnet contact” for 5 seconds .
The “ACt” text appears in the information field, and the “Degrees Celsius” icon
appears
The current room temperature is displayed permanently in the “information field“.
»
Restoring the defaults
The delivery state of the room sensor can be restored by resetting it to its defaults. All
information, the learned heating time profile and the radio partners is deleted when defaults
are restored.
02 Magnet Starts toggling between room temperature/time
(Not included in scope of delivery)
03 Degrees Celsius/
clock Unit for information field
04 Information field Room temperature or time, text
After restoring the defaults, the valve controllers should be registered again,
otherwise the room sensor will switch off after 15 minutes.
→ Registering the valve controller (S.14)
Item Designation Explanation