ATTACH THE FRONT WHEELS
Before you begin: Remove the axle nut and washer from the
end of the front axle.
❶ Slide the large washer onto the end of the front axle until it
meets the axle stop. Figure 3.5
❷ Slide the wheel all the way onto the axle until it meets the
large washer. Note: All the wheels are identical and can be
placed on any axle.
❸ Align the tabs on the hubcap with the slots in the wheel.
Press the hubcap into the wheel until in snaps into place.
❹ Slide the small washer onto the end of front axle.
❺ Place the retainer nut onto the end of the front axle and
tighten with the spanner.
❻
Align the tabs on the wheel cover with the slots in the
hubcap. Press the wheel cover into the hubcap until in snaps
into place.
❼ Repeat steps 1-6 for the opposite front wheel.
11
2
6
3
4
1
5
Figure 3.5
