KIDDY GUARDIAN PRO 2, Инструкция по применению

Страница: 29 / 119

9
Do not attempt to adjust the reclined position during travel. Always
bring your vehicle to a complete stop to do this. Unfasten the vehicle
restraint, change the position of the sleeping clamp (E) and the
backrest (C), and then secure your child (the child restraint system)
again.
To secure your child in the reclined position, proceed as described in Section
6.
6. In-vehicle installation for Age Group I (9-18kg)
Position your kiddy on the vehicle seat as described in Section 4.
Check to see whether your kiddy is adjusted to the size or body weight of
your child (Section 5).
The kiddy guardian pro 2 is secured with the three-point vehicle restraint
using the belt guide on the impact shield (N) (Fig. 14).
Your kiddy guardian pro 2 may only be used for Age Group I with the
impact shield (M) and seat cushion (K) belonging to it.
Place your child in the seat and ensure that the child’s buttocks press against
the backrest (C).
Push the impact shield (N) into the guide slots on the seat section (Fig. 15).
Slide the impact shield back so that it rests right on your child's tummy.
Then pull your vehicle’s three-point restraint out far enough so that it goes
around your kiddy and can be directly fastened in your vehicle's own
seatbelt lock (Fig. 16).
Make sure that the seatbelt tongue locks securely in place with a noticeable
“click.”
ENG
All manuals and user guides at all-guides.com