KIDDY Evolution Pro, Инструкция по применению

Страница: 30 / 117

Now tighten the belt system (Fig. 16). Make sure that the belt is not twisted
(Fig. 16)!
The infant carrier is in the optimum position when the rear line at the shell is
at a 90° angle (vertical) to the horizontal line (Fig. 16).
Some vehicles are fitted with so-called retractor locks. With
this, the automatic recoiling of the belt can be blocked, which
makes a more solid installation of your Kiddy possible. Read
your vehicles’ owner manual for more information on this feature or ask your
authorised workshop.
7.2 Installation with the Isofix platform
7.2.1 Seat selection
Read up all the necessary information about the use of child restraint
systems in your vehicle owner’s manual.
With the Isofix platform, the child restraint system Kiddy evolution pro can be
installed in any seat in a vehicle that is fitted with Isofix anchors.
However, you must refer to the included vehicle type list with regard to seat
selection in your vehicle. The latest version of the vehicle type list is always
available for download at http://www.kiddy.de/content/files/isofix-base.pdf.
Backward facing child restraint systems may never be used
with an activated front airbag!
7.2.2 Installation steps on the Isofix platform
First the Isofix platform has to be properly mounted in the vehicle. For
this purpose, please refer to the instruction manual for the Isofix
platform.
9
ENG
*