KIDDY Evolution Pro, Инструкция по применению

Страница: 27 / 117

Never use your Kiddy in the reclined position in a vehicle. The reclined
position is intended for use outside the vehicle only.
5.2. Using the newborn inlay
Your Kiddy evolution pro is equipped with a comfort insert for newborns. This
inlay ensures a more level position of your baby in the infant carrier.
This comfort inlay may only be used for babies up to the age of 6 months
(Fig. 3). To remove the inlay, open the buckle and remove the insert from the
shoulder belts.
Premature babies: A special insert for premature babies, which offers a
significantly better seating and lreclined position, is available as an
accessory.
5.3. Using the sunshade
To unfold the sunshade pull it out from underneath the headrest (Fig. 4;
No. 1), feed it through underneath the handle and hook both eyelets into the
hooks attached to the handle (Fig. 4; No. 2).
6. Buckling / unbuckling of the baby
6.1 Loosening the belt system
Turn the carry handle in to the carry position.
Before you can adjust the height of the shoulder belts, the belt system must
be loosened.
For this purpose, keep the central adjuster pressed in the front under the
seating area (Fig. 5, No. 1), and pull the shoulder belts (Fig. 5; No. 2) out.
6.2 Adjusting the height of the belt system
Open the front cover at the head end of the infant carrier by slightly pressing
the hooks upward. (Fig. 6; No. 1), now the cover opens.
6
ENG