![background image](http://html1.mh-extra.com/html/kidde/pi2010ca/pi2010ca_user-manual_1965342013.webp)
12
Installation
Battery
This unit will not function without a properly installed
battery. When installing a battery, press the battery
reminder tab down into the battery compartment and
install the battery (See Image 6A and 6B)
.
For initial
installation a pre-installed 9 V battery is included with a
battery pull tab that allows for easy connection.
CAUTION: If the battery reminder tab is not held down in the battery
compartment by the battery, the battery door will not close and the unit
will not attach to the mounting plate.
Testing
• After installation, test your alarm by depressing and
holding down the test button for 5 seconds or until the
alarm sounds.
CAUTION: Due to the loudness (85 decibels) of the alarm, always stand an
arms-length away from the unit when testing.
The smoke alarm is operating once a fresh battery is installed
and testing is complete. When the smoke alarm ionization
sensor chamber senses products of combustion, the horn will
sound a loud (85 db) alarm until the sensing chamber is
cleared of smoke particles.
Operation
IMAGE 6A
IMAGE 6B
Battery
tab