BATTERY ACTIVATION AND DEACTIVATION
NOTE: One Lithium-Ion battery, permanently sealed inside the alarm,
powers this unit; no battery installation or replacement is necessary for
the life of the alarm.
IMPORTANT:
Constant exposure to high or low humidity may reduce
battery life.
WARNING! DO NOT ATTEMPT TO OPEN THE ALARM
FOR ANY REASON!
Do not try to repair the smoke alarm yourself. No serviceable parts
included.
Low battery:
This alarm is equipped with a low battery monitor circuit
which will cause the alarm to produce a single “chirp” approximately
every 60 seconds and blink the Red LED every 30 seconds, for a
minimum of seven (7) days should the battery become low.
THE UNIT MUST BE DEACTIVATED (see “Deactivation of Alarm”
section) and replaced within 7 days of the first occurrence of the
“Low Battery Warning” to provide continuous alarm protection.
WARNING!
• Deactivation of the alarm is permanent. Once the alarm has
been deactivated, it cannot be reactivated!
• Once deactivated, the alarm will NO LONGER DETECT
SMOKE.
• Once the alarm is deactivated the battery will be depleted
and the alarm will no longer function.
• Once the alarm has been deactivated, it cannot be mounted
onto the mounting plate or reactivated.
8. Battery
9. Deactivation of Alarm
