22
Installation Guide
How to Install
1. Remove all your new Kidde wireless interconnect devices
from their respective packages and place them in front of
you.
2. Find the eight-position DIP switch located inside the battery
compartment (see Figure 1).
3. Select one of the units. You will define the ID pattern of your
system by positioning the switches of the DIP switch in a
random pattern. The ID pattern will need to be the same
for each alarm. This ID pattern will differentiate your alarm
system from similar systems nearby. Do not use the default
ID pattern that your units are shipped with.
4. Use a pen or pencil to change the switches in each of the
Kidde wireless devices to match the pattern you selected in
Step 3. Ensure that the pattern sequence is not reversed.
5. Power each unit after setting the ID pattern by installing the
batteries (see the Installing Batteries section). The alarms
only read the ID that has been set when they are first
supplied power.
back view
installation
Figure 1
Installation Guide
2521-7203-00_V7b.indd 22
14-2-18 上午11:48