background image

Pandora would like to thank you for choosing  

our DXL-0050L service and security system

Pandora is a brand of Russian Experimental Engineering Factory, a full production cycle 

electronics R&D facility. We design and produce car service-security systems for more than 10 years 

and have reached a considerable success on domestic markets – biggest security system markets in 

the world. Our systems are made to withstand severe weather conditions and criminal situation of 

northern Eurasia. 

Pandora DXL-0050L is a premium car service-security system, built for cars with on-board 

voltage of 12V. It is a complex engineering solution which includes car security system, telemetry, 

remote and automatic engine start and various service options, all accessible via RF control remote 

that can replace your factory remote. This system is designed to be all-in-one car service and security 

solution and requires no additional modules: it includes algorithmic keyless bypass that works with 

many popular car models. For even more convenience, it allows remote control over Webasto or 

Eberspaecher preheaters – and even sequential use for automatic engine start.

WARNING! 

IT IS STRONGLY ADVISED TO HAVE PROFESSIONAL CAR MECHANIC INSTALLING 

THE SYSTEM. CERTIFIED INSTALLERS ARE RARE OUTSIDE RUSSIA, BUT ANY CAR 

ELECTRONICS INSTALLER SHOULD BE ABLE TO INSTALL PANDORA DXL-0050L  

USING INSTALLATION SCHEME IN THIS MANUAL AND ALARMSTUDIO SOFTWARE. 

MOST FEATURES ARE HIGHLY DEPENDENT ON COMPETENT INSTALLATION. 

OUR SYSTEMS ARE THOROUGHLY TESTED FOR QUALITY, SO IF A FEATURE FAILS 

TO PRODUCE EXPECTED RESULTS, MOST LIKELY THE PROBLEM IS IN IMPROPER  

INSTALLATION.

It is essential for systems functioning that you read and understand instructions in this manual.

Note that all radio devices are subject to interference, which could affect proper performance.

This device has limited external factors resistance. It should not be subjected to water beyond occasional splatter, or operated in 

temperatures outside -40 to +80 

o

C range.

IMPORTANT! Note that this manual describes remote and manual functions for the 

most part. Functionality of the system is vast and would require a book-sized manual to 

fully describe. Instead we use a handy software named AlarmStudio that functions as both 

programming tool and an extended installation & functionality manual. It requires Windows 

and can be downloaded at pandorainfo.com

Product is in conformity with Electromagnetic Compatibility 

Directive EMC 2004/108/EC and R&TTE Directive 1999/5/EC

Summary of Contents for DXL-0050L













































Reviews: