![background image](http://html1.mh-extra.com/html/kidde/10llco/10llco_manual_1964991013.webp)
12
7. Using Your Alarm (non-digital version, 10LLCO)
Tes0ng
Test your alarm each week by pressing the test bu0on. It will beep once followed by 4 loud
pulses, then a brief pause and then 4 more pulses, ending with a single beep. During this test
sequence, the red LED will flash for 10 seconds.
This confirms that the alarm is powered up and working.
Re-se1ng the Alarm
If the alarm sounds, the test / reset bu0on will silence the alarm unless it is s/ll detec/ng
dangerous levels of CO. The green light will then flash every 30 seconds to indicate that the
alarm has power.
Alarm Memory (non-digital only)
The red LED will flash every 60 seconds to indicate if a CO event has occurred whilst the house has been
unoccupied. This automa/cally cancels a!er 14 days or if the reset bu0on is pressed.
11
2539-7201-05_10LLCO_10LLDCO_V1:_ 2016.11.2 9:06 AM Page 12