KickAss KAPWM30A Скачать руководство пользователя страница 3

2

Ÿ

Designed with PWM technology.

Ÿ

Common negative grounding design and 100% solid state.

Ÿ

Suitable for solar panels with max open circuit voltage of 25V

Ÿ

7 Different Battery type charge profiles included:

 

• Lead crystal

 

• Calcium

 

• Gel

 

• AGM

Ÿ

Lithium BMS "Wake up" feature to automatically reactive BMS.

Ÿ

Highly efficient charger that ensures your battery is charged to 100% every time. 

Ÿ

Coloured LED's that indicate the charging status and battery conditions.

Ÿ

Big Digital LCD to clearly display battery voltage, charge current, overall charged 
capacity (Amp hour of charge into battery), battery type, charge percentage, battery 
temperature and fault codes.

Ÿ

Plug & Play connection that accepts Anderson plug connection.

Ÿ

M5 Screw terminals for hardwired option.

Ÿ

Protection features including: Overvoltage, Short Circuit, Reverse Polarity and 
Thermal Protection

Ÿ

Over voltage protection, Short circuit protection, Reverse polarity protection

Ÿ

Includes external battery temperature sensor.

Ÿ

IP65 rated, suitable for indoor or outdoor use, surface panel mount

Ÿ

Rubber dust cover for terminal protection

Ÿ

The battery should be mounted in a well ventilated area, and a safe distance from any ignition 
source. NEVER smoke or allow a spark or flame in the vicinity of the battery. This may cause the 
battery to explode.

Ÿ

If battery acid comes in contact with skin or clothing, wash immediately with soap and water. If acid 
enters eye, immediately flush eye with running cold water for at least 10 minutes and get medical 
attention immediately.

Ÿ

To reduce risk; take when using any metal tool near the battery to avoid risk of shorting the 
terminals.

Ÿ

To reduce the risk of sparks, connect or disconnect the Solar Blanket to the charge regulator 
BEFORE exposure to sunlight. The Solar Blanket may generate voltage up to the rated open 
circuit value, at the connection leads while unconnected.

Ÿ

Ensure a fuse or circuit breaker is installed on connection from battery to regulator.

Ÿ

Do not disassemble charger, contact KickAss customer support for trouble shooting advice.

Ÿ

Do not reverse polarity connect the wires to the solar panel or battery.

FEATURES

• WET (Lead acid Flooded)
• Lithium Iron Phosphate battery (LiFePO4)
• LI-LION series

Содержание KAPWM30A
















Отзывы: