KickAss KAPWM30A, Руководство пользователя

Страница: 2 / 15

1
INTRODUCTION
KickAss is focused on bringing the luxury of home to the outdoors. Your one stop shop for 12V
products. All of our products are designed to be plug and play, for the ultimate camping experience.
Designed by the KickAss team in Australia.
The KickAss 12V PWM 30A Solar Regulator has been design to provide a compact plug and play
solar power solution, highly efficient power conversion to keep your battery safely charged. Our
team of dedicated engineers test every product to make sure they stand up to the tough Australian
outback. The KAPWM30A solar regulator uses a solid state design with Pulse Width Modulation
(PWM). Without the need of cooling fans, the unit is fully sealed, rated at IP65 making it dust and
water resistance for outdoor use.
IMPORTANT WARNING AND SAFETY INSTRUCTIONS!
DO NOT operate Solar Panel UNLESS YOU HAVE READ AND UNDERSTOOD THIS MANUAL and
the Solar Regulator is installed as instructed.
Working in the vicinity of Lead-Acid batteries is dangerous. During normal operation batteries
generate explosive gases. It is important that the battery is operated in a well ventilated area and
the Solar Regulator is installed as directed.
Check the battery manufactures guide for the recommended voltage profile for charging.
Failure to ensure the selected voltage does not exceed the recommend profile could damage your
battery. Change the selection if necessary before charging the battery.
Risk of injury and damage due to incorrect installation product:
Ÿ
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they are supervised
or have been properly instructed on how to use the appliance by a person responsible of their
safety.
Ÿ Children should be supervised to ensure they do not play with the appliance.
Ÿ Ensure to use the Solar Panel with a regulator of the correct input rating and suitable charge
profile for the battery chemistry type being charged. Suitable battery types include; Lead Acid,
Gel, Calcium, AGM or Lithium.