Inverter Cables (Optional)
KickAss Inverter leads have been designed to allow you to
easily connect a high powered inverter to the battery box.
When it comes to Inverter cables, there is no substitute for
quality and these KickAss Inverter Cables have been
designed to work flawlessly and to provide a high current
flow to your inverter.
Note:
Ÿ
The internal BMS will not allow more than 100 amps to
be drawn from the battery, do not exceed a 1200W
inverter load.
SWITCHES
The Master Switch
The master switch disconnects everything (except for the large
175 amp Anderson style plug and the LCD screen) from the
battery, including the DCDC Charger. Turning it off is a quick
way to disconnect all devices to ensure your battery is not being
drained.
Note: The DCDC C Solar Regulator cannot charge the
internal battery while the Master Switch is in the OFF position,
neither can an externally connected charger.
LCD SCREEN
The KickAss Lithium Battery Box Monitor has a display and two buttons. The screen is
used to monitor the state and condition of the battery. The display features the following:
Ÿ
Battery State of Charge (SoC).
Ÿ
Instantaneous Current Flow, positive when charging, negative when discharging
Ÿ
Battery pack voltage and individual cell voltages
Ÿ
Battery Temperature
Ÿ
Remaining time to full/empty at the current rate of charge/discharge
Ÿ
Total Capacity of Battery
Ÿ
Number of full cycles the battery has completed. A full cycle is defined by 100%
discharge and re-charge of a battery. Depleting a battery to 50% and recharging it
twice will result in 1 cycle.
Ÿ
Mutable Low Battery Alarm
Ÿ
Battery Capacity Condition State (Excellent, Good, Fair, Bad)
Ÿ
Battery Protection Alarms
Note:
Only turn this switch off when placing the battery in storage and
not attempting to charge.
