Step 1:
Confirm install location of tray, drilling any required
holes.
Install the strap under the tray, sliding the strap into
the slots either side.
Ensure strap is oriented correctly so that the hooks
face toward the Power Station when installed.
Securely affix the tray in position using bolts or
screws, whichever is applicable.
Ensure that washers are used when installing the
tray, to avoid damage.
Note: We do not provide the screws or bolts for this
installation.
Step 2:
Ensure straps are laying outside
the tray before lowering the battery box
carefully onto the tray. Attach each strap
hook to the corresponding slot in the
Power Station.
Step 3:
For ease of tightening, place
thumbs in each strap loop, pushing firmly
downwards. The strap should tighten and
hold the Power Station firmly in place.
To release, depress the buckle and pull
the strap to loosen.
MOUNTING TRAY (OPTIONAL)
TOP
BOTTOM
OPTIONAL ACCESSORIES
LITHIUM
LiFePO
4
POWER STATION
SKU: KAJBLBASE | V1.8
ON
OFF
A
B
00.88
CURRENT
26.70
TEMP
7H 43M
TIME TO EMPTY
VOLTAGE
A
12.75
V
C
PAGE 1
90%
DISCHARGING
PAGE 2
