Kichler Lighting EYRIE, Инструкция по эксплуатации

Страница: 8 / 57

8 | KICHLER.COM
Step 6. Loosen the two set screws and remove the hitch pin and
retaining clip from the coupling on top of the motor assembly. (Fig.
8)
Step 7. Carefully feed the electrical lead wires from the fan up
through the downrod. Thread the downrod into the coupling until
the Hitch pin holes are aligned.
Next, replace the hitch pin and retaining clip. Tighten both set
screws. (Fig. 8)
HANGING THE FAN
(continued)
Fig. 8
Supply wires
Downrod
Hitch pin
Retaining clip
Set screws
Set screws
Reverse switch