Kichler Lighting EYRIE, Инструкция по эксплуатации

Страница: 15 / 57

13" EYRIE
TM
| 15
Fig. 17
Fig. 18
Remove the face plate of the Wall Switch by lifting at the top and
then insert the supplied 12V battery. Duracell MN21/Eveready
A23/GP 23A all 12V.
Replace the switch face plate.
To prevent possible damage to the transmitter, remove these
batteries if not used for long periods of time (months).
HI Button = High Speed
MED Button = Medium Speed
LOW Button = Low Speed
FAN OFF Button = Motor Off
Light Button
= the "LIGHT" button turns the light ON or OFF
and also controls the brightness setting. (Fig. 18)
Press and hold either button to set the desired brightness level. The
next time you turn the light on, the system will remember this
setting.
Press and release either button to turn the light ON or OFF.
This control system is NOT designed to "Reverse" the rotation of
the blades. To set the fan blades in reverse, the reverse slide switch
is located on the top of the motor housing.
INSTALLING THE BATTERIES
HI
MED
LOW
FAN OFF
ON ECE
1 2 3 4
LIGHT
23AE 12V
OPERATING INSTRUCTIONS