Kichler Lighting 300253AVI, Инструкция по эксплуатации

Страница: 6 / 60

6
INSTALLING THE TOP HOUSING
Step 1. Remove the clip, cross pin and two set screws from the top coupling of the
motor body, and save for later use on step 4. (Fig. 5)
Step 2. Carefully feed the fan wires up through the center hole of top housing, place
the top housing over the motor body and align the holes. Insert three (3) screws
from the hardware pack into the holes and securely tighten them. (Fig.6)
Crosspin
Clip
Set Screw
Screw ( 3 )
Top Housing
Motor Body
Fig. 5
Fig. 6