Kia Telluride, Руководство по функциям и возможностям

Страница: 23 / 70

21
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE
OPERATING INFORMATION AND SAFETY WARNINGS. *IF EQUIPPED
†LEGAL DISCLAIMERS ON BACK INSIDE COVER
AD
AS
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS)
Smart Cruise Control (SCC) with Stop & Go
†6
(Continued)
REMINDERS:
§
CRUISE indicator must be ON in order to operate SCC
§ The cruise control system will not activate until the brake pedal has been depressed at least once after the ignition is ON or
engine starting
§ The SCC system remains ON when ignition is cycled. The speed setting will need to be reset when ignition is cycled
§
When following a vehicle, the system will automatically adjust your cruise speed based on the vehicle detected in front
§ The SCC is also canceled when the driver’s door is opened, gear shift is changed out of D (Drive), EPB is activated and various
other conditions. See the Owner’s Manual for other conditions
§ If the SCC system is left on, it can be activated inadvertently. Keep the system off when not in use to avoid setting a speed which
the driver is not aware of
§ The SCC system is a supplemental system and is not a substitute for safe driving. It is the responsibility of the driver to always
check the speed and distance to the vehicle ahead
Use switch or pedal
to accelerate
RES +
SET -
The Leading Vehicle Departure Alert system is not a substitute for safe and proper driving. Always drive safely and use caution.
Images are for illustrative purposes only and may not reflect actual feature or operation.
See section 5 in the Owner’s Manual for more information.
REMINDERS:
§ When the ignition is cycled, the system returns to its previous state, on or off
§
Always check the front of the vehicle and road conditions before departure
Leading vehicle
is driving away
RES +
SET -
Leading Vehicle Departure Alert (LVDA) *
†6
If your vehicle comes to a stop while SCC is in operation, a message A
will appear on the Instrument Cluster within three seconds.
When the vehicle detects that the leading vehicle is driving away, the
LVDA system sounds an alert to let you know you can start driving. You
can depress the accelerator or use the SCC RES+/SET- button
B
to
start accelerating.
If no action is taken after the vehicle in front drives away, then a
message
C will appear on the Instrument Cluster.
To turn the system on, go to User Settings in the Instrument Cluster. Press the MODE button D on the
Steering Wheel, go to Drive Assistance > Driving Assist > Leading Vehicle Departure Alert and press the OK
button
E on the Steering Wheel.
CRUISE
MODE
CRUISE
CANCEL
RES
OK
SET
CRUISE
CANCEL
RES
OK
SET
MODE
CRUISE
CANCEL
RES
OK
SET
MODE
CANCEL
RES
OK
SET
MODE
CRUISE
CANCEL
RES
OK
SET
CRUISE
CANCEL
RES
OK
SET
B
D
E
A C