Fig. 129: Illustrating Connecting Rod Bolt Protective Sleeves
Courtesy of KIA MOTORS AMERICA, INC.
35. Check piston rings for correct end gap stagger.
36. Place piston (cylinder number one) with"F"mark facing front of engine block, then slip piston and
connecting rod assembly into a piston ring compressor.
37. Rotate crankshaft so that crank pin journal for specific cylinder is at its lowest point (bottom dead center).
38. Lower piston and connecting rod assembly until piston ring compressor makes contact with deck surface
of engine block.
2004 Kia Spectra
2004 ENGINES 1.8L 4-Cylinder
domingo, 7 de febrero de 2021 08:29:51 a. m.
Page 127
© 2011 Mitchell Repair Information Company, LLC.