Kia OPTIA hybrid 2020, Руководство по функциям и возможностям

Страница: 21 / 54

19
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS . *IF EQUIPPED †LEGAL DISCLAIMERS ON BACK INSIDE COVER
To use electrical accessories:
ACC position
•
When in the OFF position and without depressing the brake pedal, press
the ENGINE START/STOP button once (amber light
A
)
ON position
•
When already in the ACC position (amber light A
) and without
depressing the brake pedal, press the ENGINE START/STOP button again
(red light
B
)
•
When in the OFF position and without depressing the brake pedal, press
the ENGINE START/STOP button twice (red light
B
)
Keeping the vehicle in ACC or ON position without turning engine on may
discharge the vehicle’s 12-volt battery .
QUICK TIPS
Engine Start/Stop Button
& Smart Key Video
To view a video on your
mobile device, snap this
QR Code or visit the listed
website .
Refer to page 2 for more
information .
QR CODE
www.youtube.com/KiaFeatureVideos
A B
REMINDERS:
•
In an emergency situation while the vehicle is in motion, you are able to turn the
engine off and to the ACC position by pressing the ENGINE START/STOP button for
more than 2 seconds or 3 times successively within 3 seconds
•
If the Smart Key battery is weak or not working properly, hold the Smart Key fob up to
the ENGINE START/STOP button (Lock button side closest) and press to start engine
Engine Start/Stop Button
†9
To start the engine:
1 . Depress the brake pedal
2 . Press the ENGINE START/STOP button
while gear shift is in P (Park)
To turn the vehicle OFF, press the ENGINE
START/STOP button .
To use the ENGINE START/STOP button, you
must have the Smart Key fob on your person .
Hill-Start Assist Control (HAC)
†8
HAC is designed to prevent the vehicle from
rolling backward, for two seconds, when
accelerating from a stop while on a steep incline .
The HAC automatically activates whether the
ESC is OFF or ON but does NOT activate when
the ESC has malfunctioned .
REMINDERS:
•
The HAC does not operate when the gear shift is in the
P (Park) or the N (Neutral) position
•
In the event of a HAC system malfunction, see an Authorized
Kia Dealer for service
•
HAC does not replace the need to apply brakes while
stopped on an incline
•
•
When HAC is active (e .g ., accelerating from a stop
on an incline), you may notice that the brakes will
momentarily remain engaged after you depress
the accelerator
•
HAC provides a 2-second delay before the vehicle
may start rolling backward
QUICK TIPS
This illustration is for demonstration purposes only. Actual feature on vehicle may vary.
DRIVER'S PANEL