27
STEERING WHEEL CONTROLS
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS .
*IF EQUIPPED †LEGAL DISCLAIMERS ON BACK INSIDE COVER
The SCC system is a supplemental system and is not a substitute for safe driving. It is the
responsibility of the driver to always check the speed and distance to the vehicle ahead.
These illustrations are for demonstration purposes only. Actual images or buttons on vehicle may vary.
Smart Cruise Control
with Stop & Go Video
To view a video on your
mobile device, snap this
QR Code or visit the listed
website . Refer to page 2
for more information .
www.youtube.com/KiaFeatureVideos
QR CODE
Smart Cruise Control (SCC) with Stop & Go System
*
†6
The Smart Cruise Control (SCC) with Stop & Go System is designed to maintain a predetermined distance from vehicles detected
ahead by automatically adjusting the driving speed as needed . When traffic is detected, the vehicle will
slow down to maintain a set distance behind traffic without depressing the accelerator or brake pedal .
With the SCC on and activated, the vehicle-to-vehicle distance set, and the system detects a vehicle
slowing or stopping, the system can bring the vehicle to a complete stop . The system will hold the
vehicle until the accelerator pedal is pressed – when pressed and when the vehicle ahead starts to
move forward, the SCC re-engages .
To set/adjust the SCC speed:
•
Press the CRUISE button
A
to turn system ON . The CRUISE indicator will illuminate on the
instrument cluster
•
Accelerate/decelerate to the desired speed
•
Press button
B
down to set the speed . The SET indicator light will illuminate . The set speed and
vehicle-to-vehicle distance will illuminate on the LCD screen . Press the RES+/SET- button
B
up/
down to increase/decrease the set speed
To adjust the vehicle-to-vehicle distance setting
C
, press the SCC button
D
on the steering wheel .
Images on the LCD screen
E
and Instrument Cluster
F
will change when scrolling through the settings .
To cancel SCC operation:
Press the CANCEL button
G
or press the brake pedal . The LCD screen will display a message that the SCC operation is canceled .
To turn system OFF,
press the CRUISE button
A
. The CRUISE indicator on the instrument cluster will turn OFF and the LCD screen SCC image will show canceled
H
.
Smart Cruise Control
canceled
A
B
D
F
E
H
(Distances are approximate and vary
depending on vehicle speed)
172ft
130ft
82ft
106ft
C
G
To change the Cruise Control mode from SCC to standard Cruise
Control, press and hold button
A
. Repeat to switch modes again
(The SCC system must not be activated to change modes) .
For the SCC System to operate:
•
When no vehicle is in front, you must be traveling at a minimum
speed of 20 mph
•
When following a vehicle, there is no minimum speed requirement
When following a vehicle, the system will automatically adjust your
cruise speed based on the vehicle detected in front . It may even
bring the vehicle to a complete stop if necessary .
QUICK TIPS
REMINDERS:
•
Cruise Control button must be ON in order to turn SCC ON/OFF
•
The SCC system is turned ON again when the ignition is cycled off, then on again .
The speed setting will need to be reset when ignition is cycled
•
When following a vehicle, the system will automatically adjust your cruise speed
based on the vehicle detected in front
•
If the SCC system is left on, it can be activated inadvertently . Keep the system off
when not in use to avoid setting a speed that the driver is not aware of
•
In standard Cruise Control, the driver needs to manually assess the distance from
other vehicles as the system will not apply brakes to slow down automatically in order
to turn SCC ON/OFF
•
The SCC is also canceled when the driver’s door is opened, gear shift is changed out
of D (Drive) and various other conditions . See Owner’s Manual for other conditions
Содержание OPTIA hybrid 2020
Страница 1: ......
