Your Automatic Climate Control system may differ from those in the illustration.
Refer to section 4 in the Owner’s Manual for more information.
Automatic Climate Control
A
Driver Only Fan Control
B
Temperature Control knob
C
Automatic Climate Control button
D
Front Windshield Defroster
E
Rear Windshield Defroster
F
Air Conditioning On/Off button
G
Recirculated Air button
H
Mode Selection button
I
Dual Temperature Control knob
J
Dual Climate Control button (SYNC)
K
CLIMATE information screen
selection button
L
Fan Speed Control buttons
M
System OFF button
Climate Control Auto Function
1. Press AUTO to select Full Auto Operation. The Auto setting
automatically controls the airflow modes, fan speeds, air intake
and air conditioning according to the temperature setting selected
2. Set desired temperature
3. Press SYNC to synchronize driver and passenger temperature control
REMINDERS:
•
Continuous use of the climate control system in the recirculated air
position may allow humidity to increase inside the vehicle which
may fog the glass and obscure visibility
•
Pressing any button during AUTO operation will deactivate the AUTO
function and switch to manual mode, except for Temperature Control
•
MAX A/C Mode automatically engages Recirculated Air
•
When in AUTO mode, Air Flow mode and Fan Speed do not display
on the Climate Control Display
•
Cold or warm ambient air may flow in through vents if Recirculated
Air button is not pressed ON (LED lit)
•
Defrost mode
activates A/C and opens Fresh Air Vent to help
dehumidify the air and improve Defroster performance
•
During Auto Operation, the A/C indicator will NOT illuminate. The fan
speed, air intake, air flow and air conditioning may automatically be
engaged at any time to reach desired temperature and reduce humidity
•
Keep inside glass as clean as possible to reduce window fogging
QUICK TIPS
Auto Defogging System:
Auto defogging is designed
to reduce the fogging up of the inside of the windshield
by automatically sensing the moisture of the inside of
the windshield. The system will automatically change to
defrost mode when needed.
Auto Defogging is set ON by default. To cancel Auto
Defogging, press and hold the Front Defrost button
for three seconds when the ignition is on (the defrost
button light will flash three times and the ADS OFF icon
will illuminate). To turn Auto Defogging on again, press
and hold the Front Defrost button
again for three
seconds and the defrost button light will flash six times
and ADS OFF icon will turn off.
Driver Only Ventilation:
Driver Only Ventilation restricts
air flow to the driver’s side vents only. This can help to
optimize driving range by limiting the power drawn from
the battery. Press DRIVER ONLY button to enable air flow
through the driver’s side vents only.
Defrost Outside and/or Inside Windshield:
1. Set fan speed to the highest position
2. Set
temperature
to
Hot
3. Press the
Front Defrost
button
Air Flow Modes:
To select
Air Flow Modes, press the
Mode selection buttons:
Face-Level
Bi-Level
Floor-Level
Floor/Defrost-Level
A
B
C
D
E
M
L
K
F
G
H
I
J
Refer to the inside front cover for
more information on QR codes.
www.youtube.com/KiaFeatureVideos
QR CODES
Auto Defogging
System Video
Automatic Climate
Control Operation Video
CENTER PANEL
CEN
TER
PA
N
EL
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
*IF EQUIPPED
47
Содержание niro hybrid 2021
Страница 1: ......