Kia niro hybrid 2021, Руководство по функциям и возможностям, Страница: 35 / 66

ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS. *IF EQUIPPED
33
Refer to section 4 in the Owner’s Manual for more information.
Headlight position
Parking light position
AUTO *
Auto Light Position /
DRL / HBA*
OFF
OFF position
Headlights & High Beams
To operate:
•
Rotate lever to change the Headlight function
•
Push lever to turn High Beams ON
• Pull lever to flash Headlights/High Beams
High Beam Assist (HBA)* –
The High Beam Assist
is designed to automatically adjust the headlight
range by switching between high and low beams
based on light detected from oncoming vehicles
and road conditions.
When switch is in the AUTO position and the vehicle’s ignition
or the Engine Start/Stop button* is on, the High Beam Assist
will operate. To turn HBA off, change the switch setting.
AUTO Light position – When the light switch is in the AUTO Light position, the tail lights and
headlights will turn ON/OFF automatically depending on the amount of light outside the vehicle.
Daytime Running Lights (DRL)* – DRL may help others to see the front of your vehicle during
the day. The lights will be on automatically when the ignition or ENGINE START/STOP button* is
ON and the headlight switch is in the AUTO position, unless one of the following occurs:
•
Headlights are on
•
Parking brake is applied
•
Fog lights are on
•
Engine is turned off
Turn Signals & Fog Lights *
To operate:
•
Turn Signals - Move lever Up/Down for Right/
Left Turn Signal
•
Fog Lights - Press switch A
to turn Fog
Lights ON/OFF
One-Touch Lane Change Signal is activated by
briefly pressing the Turn Signal Lever slightly for
less than 1 second and then releasing. The lane
change signal will blink 3 times.
To change how many times (3/5/7) the Lane
Change Signal blinks, go to User Settings Mode
in the LCD Instrument Cluster modes.
REMINDERS:
•
High Beam Assist does not operate below certain speeds, or in some lighting and driving conditions. Please be aware
of your surroundings and exercise proper road etiquette when operating a vehicle while using the high beams
•
HBA will operate when vehicle speed exceeds 25 mph
•
If the lever is pushed away from you while HBA is operational, HBA will turn off and the high beams will be on
continuously. If the lever is pulled toward you while HBA is operational, HBA will turn off
•
If the light switch is switched to the headlight position, HBA will turn off and low beams will be on continuously
•
DRL only operates during the daytime
•
The DRL system turns off when the headlights are ON, parking brake is applied or the front fog lights are turned on
REMINDER: Headlights must be ON for Fog Light operation.
A
ST
EER
IN
G W
HEEL
CON
TR
OL
S
STEERING WHEEL CONTROLS