ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
*IF EQUIPPED †LEGAL DISCLAIMERS ON BACK INSIDE COVER
27
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS)
A
DA
S
MODE
RES
CRUISE
CANCEL
OK
SET
MODE
RES
CRUISE
CANCEL
OK
SET
MODE
REMINDERS:
•
Current highway speeds and controlled or limited access road information may vary. Future navigation updates may change this information
•
If the driver changes the speed while in automatic speed setting mode, it deactivates and enters a manual mode
•
When the ignition is cycled, the system returns to its previous state, on or off
60
mph
A
B
C
D
E
Refer to the inside front cover for
more information on QR codes.
www.youtube.com/KiaFeatureVideos
QR CODES
Highway Driving Assist
(HDA) Video
Highway Driving Assist (HDA)
*
†6
Highway Driving Assist (HDA) is designed to adjust the speed of the vehicle when driving on limited/
controlled access highways/freeways. The system can adjust the vehicle’s speed based on available
highway speed information. The automatic speed setting mode is designed to set the speed
automatically by adjusting to the current speed limits of the highway the vehicle is traveling on.
To activate HDA, turn Smart Cruise Control (SCC) on by pressing the Driving Assist
CRUISE
/
Driving Assist Mode
CRUISE
button*
A
on the Steering Wheel. When HDA is activated and the
conditions are met, the Instrument Cluster indicator
B
will illuminate green. If the conditions are
not met, HDA will be in standby mode and the indicator light
B
will illuminate white. When in
operation, and if both lanes are recognized, the Instrument Cluster will show the lanes illuminated
white and the HDA indicator illuminated green
B
.
If HDA is activated, conditions are met and the SCC speed is set by the driver (at the posted
highway speed limit or slower), HDA will enter the automatic speed setting mode. The set speed
and AUTO will be displayed
C
in green and an audible alert will sound.
HDA will operate only when these conditions are met:
• The vehicle is traveling slower than 95 mph or the highway speed limit
• When driving on limited/controlled access highways/freeways
• When the SCC is on and operating
• When the SCC speed is set to current posted highway speed or slower
HDA User Settings:
To enable HDA, press the Mode button
D
on the Steering Wheel and go to User Settings
in the Instrument Cluster. Press the Move (OK) button
E
up/down and press Driver Assistance,
then Driving Assist, Highway Driving Assist. Then press the OK button
E
to enable.
Some models access settings through the Vehicle Settings in the audio head unit. Press the Setup
hard key on the audio head unit, then press
VEHICLE
on the screen to enter Vehicle Settings.
Highway Driving Assist is not a
substitute for safe driving, may
not detect all objects around the
vehicle, and only functions on
certain federal highways. Always
drive safely and use caution.
See section 5 in the Owner’s
Manual for more detailed
information, limitations and
conditions.
Содержание niro hybrid 2021
Страница 1: ......