Kia EV6 2022, Руководство пользователя

Страница: 37 / 70

35
†LEGAL DISCLAIMERS ON BACK INSIDE COVER | *IF EQUIPPED ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
Rear View Monitor is a supplemental system that displays the view behind the vehicle
through the infotainment system screen while the vehicle is in Reverse.
To turn RVM on/off, press the Parking/View button
F
on the center console.
RVM User Settings:
• Camera Settings - Press the SETUP key/button on the Infotainment System. Select
VEHICLE , DRIVER ASSISTANCE, PARKING SAFETY, then CAMERA SETTINGS
• To adjust the warning volume, press the SETUP key/button on the Infotainment System,
VEHICLE , DRIVER ASSISTANCE, then WARNING VOLUME. Select high, medium, low
The Rear View Monitor activates when the:
• POWER button is in the ON/READY position
• Rotary Dial Shifter Knob is in the
R (Reverse) position
Rear View Monitor (RVM)
†4
ADA
S
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS)
Remote Smart Parking Assist (RSPA) *
†4
(Continued)
REMINDERS:
•
The images shown are for illustration purposes only and may not reflect actual operation
•
While camera is active, only the Infotainment System can be operated on the Steering Wheel and Audio
Head Unit. All other features are disabled
•
Rear View Monitor may not display every object behind the vehicle
•
Adjusting the Warning Timing and Warning Volume may adjust timing and volume levels for other
driving assist systems
•
Through normal use and after inclement weather or washing, the rear camera may become dirty. Use a
clean, microfiber cloth to remove any dirt, debris or spots that have accumulated on the lens
When engaged, RVM is not a substitute for proper and safe backing-up procedures. Rear View Monitor
may not display every object behind the vehicle. Always drive safely and use caution when backing up.
Smart Exiting:
•
Press and hold the Parking/View button A to turn on
Smart Exiting
•
Select either left or right exiting
•
Take your hands off the steering wheel to allow RSPA to
operate
•
Then press and hold the Parking/View button
A
while
RSPA is operating - hold the button until the vehicle has
finished exiting
To turn off RSPA at any point while it’s operating, press the
Parking View button
A or Parking Safety button B , press the
Park button on the Rotary Dial Shifter F
or press the Remote
Start button C
on the Smart Key.
To adjust the warning volume, press the SETUP key/button on
the Infotainment System,
VEHICLE , DRIVER ASSISTANCE then
WARNING VOLUME. Select high, medium, low (this will adjust
the warning volume for other driver assistance features).
REMINDERS:
•
Remote Smart Parking Assist will only operate if you are within 13 feet
of the vehicle, with the Smart Key in your possession
•
Remote Smart Parking Assist will not function when:
-
There is a parking space open, with a vehicle on one side only
-
When trying to park in a diagonal space
-
When the parking space is too narrow or near a wall
EV
R
N
P
AUTO
HOLD
D
(Button located below gear shift knob)
F