20
†LEGAL DISCLAIMERS ON BACK INSIDE COVER | *IF EQUIPPED
EV6
F E A T U R E S & F U N C T I O N S G U I D E
Refer to the inside front cover for
more information on QR codes.
www.youtube.com/KiaFeatureVideos
Blind-Spot Collision-
Avoidance Assist (BCA)
Video
QR CODE
Blind-Spot Collision-Avoidance Assist (BCA)
†4
REMINDERS:
•
The BCA warning may sound when turning left into an
intersection. Maintain a proper distance from oncoming
vehicles
•
BCA will not issue a warning if the vehicle speed is 6 mph
or more above the surrounding vehicles
•
When BCA is ON and the ignition is cycled, BCA returns to
its previous state
When engaged, BCA is a
supplemental system. Do not
solely rely on this system and
always pay attention to the road
and its conditions.
Refer to section 6 in the Owner’s
Manual for more information.
The images on this page are for
illustrative purposes only and
may not reflect actual feature or
operation.
•
BCA Warning Volume can be adjusted in the Vehicle
Settings in the Infotainment System. Go to Driver
Assistance, then Warning Volume
•
BCA will activate when:
-
The system is turned on
-
Other vehicles are detected on the rear sides of the
vehicle
-
Vehicle speed is above approximately 20 mph
QUICK TIPS
BCA uses rear corner radar sensors in the rear bumper to monitor and warn the driver in certain
situations if it detects an approaching vehicle in the driver’s blind spot area and before changing
lanes. Initially, BCA provides Blind-Spot Collision Warning (BCW) when it detects a potential collision
with a vehicle, emitting an audible warning and visual alert on the outside rearview mirrors. If the
system detects that the collision risk has increased, Blind-Spot Collision-Avoidance Assist (BCA)
automatically applies the opposite side front brake to try and mitigate a potential collision.
1st-stage:
When another vehicle is detected within BCW warning boundary
A
, an indicator will
illuminate on the outside rearview mirrors
B
.
2nd-stage:
When 1st stage warning is on and the driver activates a turn signal, a flashing indicator
will illuminate on the outside rearview mirrors and the system will sound a warning.
3rd-stage:
When 1st stage warning is on and the 2nd stage warning has already occurred, and
the collision risk has increased, braking is applied to the opposite side front wheel and a visual
warning occurs.
BCA User Settings:
•
To enable BCA, press the SETUP key/button on the Infotainment System.
Select the
VEHICLE
button to enter the Vehicle Settings. Select DRIVER
ASSISTANCE and then BLIND-SPOT SAFETY
•
To set BCA when in Blind-Spot Safety, select:
–
Active Assist:
BCA will provide a warning (audible & visual) and may
activate Electronic Stability Control (ESC) and temporarily apply
braking power
–
Warning Only:
Vehicle will provide a warning only (audible & visual)
–
Off:
System is off, no warnings provided
•
To set the initial warning activation time, go to the Vehicle Settings, then
Driver Assistance, then Warning Timing. Adjust the warning timing:
–
Early/Normal:
Maximizes the amount of distance between the
vehicles before the initial warning occurs
–
Later:
Reduces the amount of distance between the vehicles
before the initial warning occurs
B
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS)
ADA
S
A
Содержание EV6 2022
Страница 1: ...Features Functions Guide ...
