Kia Carnival 2022, Руководство пользователя, Страница: 74 / 687

Safety features of your vehicle
50 3
Child Restraint System (CRS)
13 must always ride in the rear
seats and must always be properly
restrained to minimize the risk of
injury.
Installing a CRS
After selecting a proper child seat
for your child, check to make sure it
fits properly in your vehicle.
Follow the instructions provided by
the manufacturer when installing
the child seat. Note these general
steps when installing the seat to
your vehicle:
䳜
Properly secure the child restraint
to the vehicle.
All child restraints
must be secured to the vehicle
with the lap part of a lap/shoulder
belt or with the LATCH system.
䳜 Make sure the child restraint is
firmly secured.
After installing a
child restraint to the vehicle, push
and pull the seat forward and
from side-to-side to verify that it
is securely attached to the seat. A
child restraint secured with a seat
belt should be installed as firmly
as possible. However, some side-
to-side movement can be
expected.
䳜 Secure the child in the child
restraint.
Make sure the child is
properly strapped in the child
restraint according to the manu
-
facturer instructions.
Lower Anchors and Tether for Chil
-
dren (LATCH) system
The LATCH system holds a child
restraint during driving and in an
accident. This system is designed to
make installation of the child
restraint easier and reduce the pos
-
sibility of improperly installing your
child restraint. The LATCH system
uses anchors in the vehicle and
attachments on the child restraint.
The LATCH system eliminates the
need to use seat belts to secure the
child restraint to the rear seats.
Lower anchors are metal bars built
into the vehicle. There are two lower
anchors for each LATCH seating
position that will accommodate a
child restraint with lower attach
-
ments.
To use the LATCH system in your
vehicle, you must have a child
restraint with LATCH attachments.
The child seat manufacturer will
provide you with instructions on
how to use the child seat with its
attachments for the LATCH lower
anchors.