4 53
Features of your vehicle
Reprogramming a single
HomeLink
®
button
To program a device to HomeLink
®
using a HomeLink
®
button previously
trained, follow these steps:
1.Press and hold the desired
HomeLink
®
button. Do NOT release
until step 4 has been completed.
2.When the indicator light begins to
flash slowly (after 20 seconds), posi-
tion the hand-held transmitter 2-8 cm
(1 to 3 inches) away from the
HomeLink
®
surface.
3.Press and hold the hand-held trans-
mitter button (or press and “cycle” -
as described in “Canadian
Programming” above).
4.The HomeLink
®
indicator light will
flash, first slowly and then rapidly.
When the indicator light begins to
flash rapidly, release both buttons.
The previous device has now been
erased and the new device can be acti-
vated by pushing the HomeLink
®
button
that has just been programmed. This
procedure will not affect any other pro-
grammed HomeLink
®
buttons.
Gate operator programming &
canadian programming
During programming, your hand-held
transmitter may automatically stop
transmitting. Continue to press and
hold the HomeLink
®
button (note
steps 2 through 4 in the
“Programming” portion of this text)
while you press and re-press
(“cycle”) your handheld transmitter
every two seconds until the frequen-
cy signal has been learned. The indi-
cator light will flash slowly and then
rapidly after several seconds upon
successful training.
Accessories
If you would like additional informa-
tion on the HomeLink
®
Wireless
Control System, HomeLink
®
compat-
ible products, or to purchase other
accessories such as the HomeLink
®
Lighting Package, please contact
HomeLink
®
at 1-800-355-3515 or on
the internet at www.homelink
®
.com.
Содержание 2014 Sportage
Страница 493: ...Index I ...