Features of your vehicle
52
4
6.Return to the vehicle and firmly
press and release the programmed
HomeLink
®
button up to three
times. The rolling code equipped
device should now recognize the
HomeLink
®
signal and activate
when the HomeLink
®
button is
pressed. The remaining two but-
tons may now be programmed if
this has not previously been done.
Refer to the “Programming” portion
of this text.
Operating HomeLink
®
To operate, simply press the pro-
grammed HomeLink
®
button.
Activation will now occur for the
trained product (garage door, securi-
ty system, entry door lock, estate
gate, or home or office lighting). For
convenience, the hand-held trans-
mitter of the device may also be used
at any time. The HomeLink
®
Wireless
Controls System (once programmed)
or the original hand-held transmitter
may be used to activate the device
(e.g. garage door, entry door lock,
etc.). In the event that there are still
programming difficulties, contact
HomeLink
®
at 1-800-355-3515 or on
the internet at www.homelink
®
.com.
Erasing programmed HomeLink
®
buttons
To erase the three programmed but-
tons (individual buttons cannot be
erased):
• Press and hold the left and center
buttons simultaneously, until the
indicator light begins to flash
(approximately 20 seconds).
Release both buttons. Do not hold
for longer than 30 seconds.
HomeLink
®
is now in the train (or
learning) mode and can be pro-
grammed at any time.
OHD046306N
Flashing
Содержание 2014 Sportage
Страница 493: ...Index I ...