background image

Note:

These instructions are for 

attachment to conventional stud and 
wallboard structures only, using the
Toggle Bolt Anchors supplied in the
hardware pack 7HP21.

Important:

Refer to the “Required

Hardware” chart below for the minimum
number of bolts, and for the minimum
number of wall stud anchorages
required to support each size of 
overhead. Always use more than the
minimum number of wall stud 
anchorages if possible.

1. Carefully unpack all parts and place 

overhead cabinet onto a soft, 
protective surface. Identify parts
below from the “Hardware Packs”
diagram & Figure 1.

2. Remove lower mounting cleat from

rear of the overhead (Figure 1).
Retain shipping screws for further
use.

Assembly Instructions

Aristotle™ Casegoods

Wa l l - M o u n t e d   O v e r h e a d   C a b i n e t

March 2008

Assemble units as described herein only. To do otherwise
may result in instability.  All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and injury.

1330 Bellevue Street • P. O. Box 8100 • Green Bay, WI  54308-8100 • Tel 1-800-424-2432 • www.ki.com 

© 2008 KI All Rights Reserved • Litho in USA • Code KI-62012/HT/PDF/0308 

Hardware Packs

Toggle
Bolt

#10 x 3”
Wood Stud
Screw

Toggle
Bolt Anchor

10

10

4

4

15

15

7HP21

- A

- B

uppe

r

 mounting 

c

leat

lowe

r

 mounting 

c

leat

ove

r

head 

c

abinet

Figure 1

Overhead width

30"

36"

42"

48"

54"

60"

66"

72"

78"

Wall stud anchorages

required (minimum)

Mounting bolts

required (minimum)

Allowable load

(maximum - lbs.)

Hardware Pack

77H

HP

P2211--A

A

77H

HP

P2211--B

B

Required Hardware

1

1

1

2

2

2

2

2

3

7

8

9

10

12

13

14

15

15

300

360

420

480

540

600

660

720

780

Отзывы: