KI Aristotle Casegoods Wall-Mounted Overhead Cabinet, Инструкция по сборке

Страница: 2 / 3

3. Position lower mounting cleat on
the wall as shown (Figure 2),
ensuring that it is properly level.
Note: The bottom of the cleat is
approximately 11
3
/
4
" above the
bottom of the overhead (Figure 2).
4. Using a 5 /
16
" drill, drill through the
required number of pilot holes in
the lower mounting cleat to mark
the mounting bolt locations on the
wall (Figure 2).
5a. For wood-studded walls , open
up the 5 /
16
" holes in the wallboard
to 1 /
2
" diameter. When a wooden
stud is encountered, drill a new
1 /
8
" hole into the stud from the par-
allel groove. Use a new #10 x 3”
wood screw to secure at this loca-
tion.
5b. For metal-studded walls , open
up the 5 /
16
" holes in the wallboard
and any metal stud to 1 /
2
" diameter.
6. Push one toggle bolt anchor into
each
1
/
2
" diameter hole and secure
as per the Instructions for
SNAPTOGGLE
® Toggle Bolts on
page 3. Installed anchor is shown
at “toggle bolt anchor installed”
(Figure 2).
7. Attach the lower mounting cleat to
the wall using the enclosed
mounting bolts (and wood screws
for wood studs).
8. Position the overhead cabinet on
the wall, ensuring complete
engagement of the upper mounting
cleat (attached to the back of the
overhead cabinet) onto the lower
mounting cleat (attached to the
wall).
9. Secure the overhead cabinet in
position using the shipping
screws, by screwing through the
pre-drilled holes in the back panel
and into the lower mounting cleat.
Assemble units as described herein only. To do otherwise may
result in instability. All screws, nuts and bolts must be tight-
ened securely and must be checked periodically after assem-
bly. Failure to assemble properly, or to secure parts may result
in assembly failure and injury.
Aristotle Casegoods™ Wall-Mounted Overhead Cabinet
Assembly Instructions
2
2 s hipping scr ew s r e-u s ed
a s r etaining scr ew s
2 hole s p r e-d r illed in ba c k of
ove r head fo r r etaining scr ew s
Ve r ti c al mounting s u r fa c e
( s hown a s
5
/
8
” wallboa r d
- fo r r efe r en c e onl y )
uppe r mounting c leat
toggle bolt
an c ho r
lowe r mounting
c leat
toggle bolt
an c ho r in s talled toggle
ve r ti c al
ove r head c abinet
app r oximatel y 11
3
/
4
”
when in s talled
Figure 2